Unibor Carbide Tipped Cutters use fine grain carbide inserts on a hardened EN24 body. They produce faster feed and longer tool life in a wide range of materials. All standard Carbide Tipped Cutters have a 3/4" shank with 2 flats at 90° and require a special 5/16" diameter pilot pin. Available in 2" length only. Alternate shank types and sizes can be special ordered.
| Hole Diameter | CUTTING DEPTH | |
|---|---|---|
| IMPERIAL (Fractional) | IMPERIAL (Decimal equivalent) | 2" |
| Part No. | ||
| 11/16" | 0.6875 | 27222 |
| 3/4" | 0.7500 | 27224 |
| 13/16" | 0.8125 | 27226 |
| 7/8" | 0.8750 | 27228 |
| 15/16" | 0.9375 | 27230 |
| 1" | 1.0000 | 27232 |
| 1 1/16" | 1.0625 | 27234 |
| 1 1/8" | 1.1250 | 27236 |
| 1 3/16" | 1.1875 | 27238 |
| 1 1/4" | 1.2500 | 27240 |
| 1 5/16" | 1.3125 | 27242 |
| 1 3/8" | 1.3750 | 27244 |
| 1 7/16" | 1.4375 | 27246 |
| 1 1/2" | 1.5000 | 27248 |
| 1 9/16" | 1.5625 | 27250 |
| 1 5/8" | 1.6250 | 27252 |
| 1 11/16" | 1.6875 | 27254 |
| 1 3/4" | 1.7500 | 27256 |
| 1 13/16" | 1.8250 | 27258 |
| 1 7/8" | 1.8750 | 27260 |
| 1 15/16" | 1.9375 | 27262 |
| 2" | 2.0000 | 27264 |
| 2 1/16" | 2.0625 | 27266 |
| Pilots | TCT2 | |